User guide

Multi Process Meter Instruction Manual
92
Display Parameter Action/Setting Description
Cal
Calibrate
Enter the Calibration menu
Calib
Calibrate
Calibrate 4-20 mA output (internal reference
source used for scaling the output)
Contrl
Control
Enter Control menu to turn relays on/off, set
analog output manually, or return meter to
automatic operation
Copy
Copy
Enter copy function
CutofF
Cutoff
Set low-flow cutoff
D Gros
Display gross
Select to display the gross
D nt-G
Display net/gross
Select to display the net/gross
D Hi
Display high
Select to display the max
D HL
Display H&L
Select to display the max & min toggling
D Hold
Display hold
Display hold
D Lo
Display low
Select to display the min
D PCt
Display PCT
Select to display percent of PV1 (dual-scale
display)
D Pv
Display PV
Select to display PV
D Pv1
Display PV1
Select to display PV1 (dual-scale display)
D Pv2
Display PV2
Select to display PV2 (dual-scale display)
D r_u
Display r-u
Select to display reading and units
D unit
Display units
Select to display engineering units or label
Dec pt
Decimal point
Set decimal point
DeLAY
Delay
Enter relay Time Delay menu
dI 1
Digital input 1
Assign digital input 1-8, if expansion modules
are connected
Diag
Diagnostics
Display parameter settings
diamr
Diameter
Enter the tank’s diameter in inches
d-Inty
Display
intensity
Set display intensity level from 1 to 8
Dis 1
Display 1
Program display 1 value
Dis 2
Display 2
Program display 2 value (up to 32 points)