User guide

Multi Process Meter Instruction Manual
93
Display Parameter Action/Setting Description
disabl
Disable
Disable function key
DLY 1
Delay 1
Enter relay 1 time delay setup (1-8)
dO 1
Digital
output 1
Assign digital output 1 – 8, if expansion
modules are connected
done
Done
Copy function completed
d-SCAL
Dual-scale
Enter d-SCAL menu and select Yes for dual-
scale display or
No for single scale display
DSet 1
Display set 1
Select to display set point 1 (1-8)
dsplay
Display
Enter the Display menu
Enter
Enter button
Assign digital input to Enter button/F3
Error
Error
Error, calibration not successful, check signal
or programmed value
F On 1
Force On 1
Force relay 1 on using digital input (1-8)
F1
F1 function key
Assign F1 function key
F2
F2 function key
Assign F2 function key
F3
F3 function key
Assign F3 function key
F4
F4 function
Assign F4 function (digital input)
FaiLSF
Fail-safe
Enter Fail-safe menu
filter
Filter
Set noise filter value
FLS 1
Fail-safe 1
Set relay 1 fail-safe operation (1-8)
Force
Force
Force analog output value for loop break
Functn
Signal input
conditioner
Select linear, square root, programmable
exponent, or round horizontal tank function
ICal
Internal source
calibration
Enter internal source calibration (used for
scaling the meter without a signal source)
ignore
Ignore
Ignore loop break condition
Info
Information
Display software and S/N information
Inp 1
Input 1
Calibrate input 1 signal or program input 1
value
Inp 2
Input 2
Calibrate input 2 signal or program input 2
value (up to 32 points)