User guide

Multi Process Meter Instruction Manual
95
Display Parameter Action/Setting Description
On 1
On 1
Set relay 1 On time delay (1-8)
O-rang
Overrange
Program mA output for display overrange
Out 1
Output 1
Program output 1 value (e.g. 4.000 mA)
Out 2
Output 2
Program output 2 value (e.g. 20.000 mA)
pass
Password
Enter the Password menu
Pass 1
Password 1
Set or enter Password 1
(Allows use of the F1–F3 function keys)
Pass 2
Password 2
Set or enter Password 2
(Allows use of the F1–F3 function keys and
changing the set/reset points)
Pass 3
Password 3
Set or enter Password 3
(Restricts all programming & F1–F3 keys)
prog
Program
Enter the Program menu
Prog E
Programma-
ble exponent
Set meter for programmable exponent and
enter exponent value
RELaY
Relay
Enter the Relay menu
reset
Reset
Press Enter to access the Reset menu
rht
Round horizontal
tank
Set meter for round horizontal tank volume
calculation
Right
Right arrow
Assign digital input to Right arrow button/F1
RLY 1
Relay 1
Relay 1 setup (1-8)
Rly d
Disable relay
Assign digital input to disable all relays
Rly E
Enable relay
Assign digital input to enable all relays
Round
Round
Select rounding values for PV display
RSt 1
Reset 1
Program reset point 1 (1-8)
Rst Hi
Reset high
Press Enter to reset max display
Rst HL
Reset
high & low
Press Enter to reset max & min displays
Rst Lo
Reset low
Press Enter to reset min display
Rst tr
Reset tare
Reset tare
Sampl
Sampling
Set relay for sampling operation