User guide

Multi Process Meter Instruction Manual
96
Display Parameter Action/Setting Description
SCAL 1
Scale 1
Enter the Scale 1 menu for PV1
SCAL 2
Scale 2
Enter the Scale 2 menu for PV2
SCALE
Scale
Enter the Scale menu
SelEct
Select
Enter Select menu (function, cutoff, output
programming)
send
Send
Send meter settings to another meter
seriAl
Serial
Set serial communication parameters
Set 1
Set 1
Program set point 1 (1-8)
setup
Setup
Enter Setup menu
SlavId
Slave ID
Set Slave ID or meter address
Source
Source
Select source for the 4-20 mA output
Square
Square root
Set meter for square root extraction
Tare
Capture tare
Capture tare
Tr dLY
Transmit
delay
Set transmit delay for serial communication
units
Units
Select the display units/tags
unloc
Unlocked
Program password to lock meter
up
Up arrow
Assign digital input to Up arrow button/F2
u-rang
Underrange
Program mA output for display underrange
user
User I/O
Assign function keys and digital I/O
v CAL
Voltage
calibration
Calibrate voltage input
v Hi
Voltage high
Calibrate high voltage input (e.g. 10 V)
v Lo
Voltage low
Calibrate low voltage input (e.g. 0 V)
volt
0-10 VDC
Set meter for 10 VDC input