User Manual

10of30 MN890570 RevA
ULSX‐CALCONFIGURATION(continued) StepSeven

Pump/ValveAction:Thisfeatureallowsyoutoselectifthepumpsor
valves will be used to automatically fill  or empty the tank.For 2‐
Pump/Valve mode, both devices must be the same (automatic fill or
empty).Youcannotsetonerelayforfillandtheotherforempty.
o EmptiesTank–  Willsetrelay(s)toautomaticallyemptyatank.
StartlevelwillbeabovetheStoplevelforeachrelay.
o Fills Tank – Will set relay(s) to automatically fill a tank.Start
levelwillbebelowtheStoplevelforeachrelay.
o Not Applicable – Appears when
 this function is not available
(such as when Switch/Alarms Only or 4‐20mA Transmitters
Onlyareselected).

  
 EmptiesTank FillsTank
 (AutoEmpty) (AutoFill)
Note:Rightclickonanymenuthatyoumayhavequestionsontoopenthehelpmenu.
Note:Toreset,presstheClearScreenbutton.

