User Manual

Rev5 MN890570 13of30
ULSX‐CALCONFIGURATION(continued) StepSeven

Switch/Alarm Configuration:This feature allows you to select the
operationfortheswitches/alarms(usedasahighorlowalarm).This
settingadjuststhenumberofavailablerelaysbasedupontheprevious
settings.
o NoAlarm–Turnsoffalloftheremainingrelays.
o High Alarm Options – Set from 1 to 4 High Alarms (1‐High, 2‐
High,3‐High,4‐High).
o Low Alarm Options – Set from 1 to 4 Low Alarms (1‐Low, 2‐
Low,3‐Low,4‐Low).
o Combination Alarms – Set a combination of High and Low
Alarms (1‐Low 1‐High, 1‐Low 2‐High, 2‐Low 1‐High, 2‐Low 2‐
High,1‐Low3‐High,3‐Low1‐High).
o Not Applicable – Appears when this function is not available
(suchaswhenTransmittersOnlyisselected).




 HighAlarmOptions LowAlarmsOptions CombinationAlarms
 (4High) (4Low) (2Highand2Low)
Note:Rightclickonanymenuthatyoumayhavequestionsontoopenthehelpmenu.
Note:Toreset,presstheClearScreenbutton.

