User Manual

14of30 MN890570 RevA
ULSX‐CALCONFIGURATION(continued) StepSeven

Switch Hysteresis/Dead band:This feature allows you to select a
hysteresisordeadbandfortheremaininghighand/orlowalarms.
o Optionsfor Hysteresis/Dead band–No Hysteresis,¼”,½”,1”,
2”,½cm,1cm,2cm,5cmorNotApplicable.
o High Alarms – Relay activates above set point.Relay will
deactivatewhenlevelgoesbelowthesetpointplusthevalueof
thehysteresis.
o Low Alarms – Relay activates below set point.Relay will
deactivatewhenlevelgoesabovethesetpointplusthevalueof
thehysteresis.




 High
Alarmw/Hysteresis LowAlarmw/Hysteresis
Note:Rightclickonanymenuthatyoumayhavequestionsontoopenthehelpmenu.
Note:Toreset,presstheClearScreenbutton.

