- DXG User's Manual Digital Camera 552

2-3 Loading the Batteries

●First, turn the camera off.

●Insert 2 x AAA alkaline or Ni-MH rechargeable batteries. Make sure the

batteries are fully charged. If the batteries are low on power, change the

batteries as soon as possible to maintain optimal operation.

※ If the power level drops below 2.3V (when the battery power indicator

only shows one black block), the flash will be disabled: If the power level

drops below 2.2V (when the battery power indicator turns red) the camera

would automatically shut off.

●Slide the battery cover open in the direction indicated by the arrow.

●Insert the batteries according to the diagram on the inside of the cover.

● Gently close and lock the battery cover.

NOTE: To avoid damaging the battery compartment cover, open and close

the cover gently.

※ If the battery power indicator only shows one black block, the flash will be

disabled.

※ When the battery indicator turns red, all recording will be disabled and the

camera will soon shut off.

※ The Date/Time would be stored for approximately 3 minutes during a

battery change. It is best to double-check the correct Date/Time after the

new batteries have been inserted.