User's Manual

18
3.2.1 Lapse Shooting
This feature allows you to continuously capture photos with one
press of the Shutter button at the preset interval time
(1/3/5/10/30/60 seconds). Shooting only stops when the Shutter
button is pressed again. Those continuous shots are combined and
saved into one video automatically. The recorded video is played
back in fast motion (faster than the normal playback speed). You can
use this feature to record videos such as evolution of a construction
project, weather changes, or flower blossom.
To switch to this mode, you must set the camera to LAPSE mode,
see Lapse on page 29 for more information.
Once the camera is in LAPSE mode, press the
Shutter button to start capturing photos. Press
the Shutter button again to stop capturing
photos.
3.2.2 Burst Shooting
This feature allows you to capture 3, 5, or 10 photos with one press
of the Shutter button.
To switch to this mode, you must set the camera to BURST mode,
see Burst Shooting on page 30 for more information.
Once the camera is in BURST mode, press the
Shutter button to start capturing photos.