User's Manual

4.5.5 Date Stamp

This menu allows you to enable the date when the photo/video is

taken to be shown on the photo/video.

Do the following to enable or disable this feature:

1. Press the Mode button repeatedly to change to SETUP

mode.

2. Press the Shutter button to enter the SETUP mode.

3. Press the Mode button repeatedly to select SETUP SYS.1.

4. Press the Shutter button to enter the SETUP SYS.1 menu.

5. Press the Mode button repeatedly to highlight DATE

STAMP.

6. Press the Shutter button to enter the DATE STAMP

submenu.

7. Press the Mode button to select ON or OFF.

8. Press the Shutter button to confirm.

9. To exit the SETUP SYS.1 menu, press

the Mode button repeatedly until the

EXIT screen appears. Then press the

Shutter button to confirm.

10. To exit the SETUP mode, press the

Mode button repeatedly until the EXIT

screen appears. Then press the Shutter

button to confirm.