User`s manual

36
4. Using the menus
Read this section to learn how to configure the camera and use the
advanced features.
4.1. Picture menu
There are two photo modes: auto mode and program mode. Only the
following options are available in auto mode: size, quality, color and
date stamp.
In Photo mode, press the MENU button to show the menu.
4.1.1. Scene
The scene option can be set to manual , where WB (white balance),
focus selection, metering, EV, and ISO can be set manually.
There are also other preset scene options and all these variables are
preset. When a preset scene option is chosen, focus, white balance, EV,
ISO, and metering cannot be altered.
1.
Turn the camera on and ensure it is in Photo mode.
2.
Press the MENU button and move the joystick down to highlight
the Scene option.
3.
Use the joystick to select a scene setting.
4.
Press the MENU button again to exit the menu.
Note: The Scene option is enabled only when photo mode is set to
program (manual).