User`s manual

54
4.4.5. Language
Please refer to the 2.5.2 “Setting the language” section.
4.4.6. Power saving
Use this function to switch the camera off automatically after a period
of inactivity for saving power.
1.
Turn the camera on, and press the MENU button to display the
menu screen.
2.
Move the joystick right to show the setup menu and move it
down to the second page and highlight the Power saving option.
3.
Use the joystick to select 3 minutes, 5 minutes, 10 minutes or Off.
4. Press the MENU again to exit the menu.
4.4.7. Default
Use this option to reset all settings to the default factory settings.
1.
Turn the camera on, and press the MENU button to display the
menu screen.
2.
Move the joystick right to show the setup menu and move it
down to the second page to highlight the Default option, and
press it to confirm.
3.
Use the joystick select No or Yes, and press it to confirm.