User`s manual

3
7
4.4.3. Number reset
Use this function to reset the file name numbers to zero.
1. Turn the camera on, and press the MENU button to display the
menu screen.
2. Move the joystick right to show the setup menu and move it
down to highlight the Number reset option.
3. Press the joystick to confirm. When camera captures new images
or videos, the file name number counter will start over.
4. Press the Menu button again to exit.
4.4.4. Beep
1. Turn the camera on, and press the MENU button to display the
menu screen.
2. Move the joystick right to show the setup menu and move it
down to highlight the Beep option.
3. Use the joystick to select the desired setting, and press it to
confirm.
: Turns all sounds off.
: Sounds appear only when turning camera on/off.
: Sounds appear only when a button is pressed.
: Turns all sounds on.
4. Press the Menu button again to exit.
4.4.5. Language
Please refer to the “Setting the language” section.