Users Manual

The power adapter is designed for use within a voltage
range from 100-240V, 50-60Hz.
Ensure that the required voltage is available before
connecting the power cord to the power adapter.
Failure to do so may damage the electronics
Use only the power adapter supplied by DXM with
the Cybird GOLD Curing Light.
1. Insert the power cable-Micro 5PIN (FIG.6) into the
3. Insert the power cable-USB port (Fig.6) into the
4. Power adapter Plug cord (Fig.9) into an electrical
5. Insert the handpiece into the Inductive wireless charger
device is charging. An illuminated green LED indicated
the light is fully charged.
Place the barrier sleeve over the curing light. Put the Light
shield and eye shield over the end of the light guide draw-
Power cable (USB Port) into the receptacle in the power
.
Connect the Cybird Inductive wireless Chager Base to the
power adapter. Insert the plug on the power adapter com-
* Reference #1
receptacle in the Inductive wireless charger base.(Fig.4)
2. Place the charger base on a level and secure surface.
power adapter (Fig.9)
base. Verify that the Inductive wireless charger base
LED is illuminated orange which indicates
that the
wall outlet.
ing the barrier sleeve taut.
adapter.
pletely into the wall electrical outlet.