Installation Sheet

ManualsBrandsDXV ManualsBathroom SinksBowen 17-1/8" Undermount Bathroom Sink with Overflow

- 1 -

NOTE: To avoid damage to

countertop, install sink such

that future removal from

underneath the countertop is

possible.

First, make sure the clearance

between the backsplash,

faucet, xtures and cabinets

are acceptable for the new

sink.

For Model 0426 to be ADA

compliant the sink must be

installed with the overow in

the rear.

Carefully cut out the enclosed template, then position and

trace the template on the countertop as shown on the

template. Make a mark of the faucet hole centerline on the

countertop. Drill a 1/2" pilot hole on the inside of the cut line.

Use a saber saw or a keyhole saw to cut out the countertop

opening.

Putty Knife

Basin Wrench

Perimeter of Sink

Cutout

Perimeter of Sink

Clip

1/2" (13mm) MIN.

Clip

FOR MARBLE OR SOLID SURFACE COUNTERTOP

FOR WOOD COUNTERTOP

Mark and pre-drill the wood screw holes as located on the

enclosed template. Waterproof any exposed areas of wood.

To protect countertop, place it on a foam padding and drill

3/8 Dia. X 1/2 deep hole as per location shown on template.

NOTE: More specialized tools may be necessary to install this sink to countertop materials other than wood or wood composites.

Drill 1/8 dia. X 3/8 deep

#10 Wood Screw

Brass insert, epoxy in place

with threaded end exposed.

(Epoxy not supplied.)

#10-32

Machine screw

7302056-100

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

NOTE: Pictures may not exactly deﬁne contour of china and components.

Rectangular/Square - models #D00614, D00426

Thank you for selecting DXV by American Standard. To ensure this product is installed properly, please read these instructions carefully

before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.

INSTALLATION INSTRUCTIONS

Webster

™

Undercounter Sinks

Oval - models #D00495, D00496

Bowen

™

Undercounter Sinks

Product names listed herein are trademarks of AS America, Inc.

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing,

supply stores. It is essential that the tools and materials be on hand before work is begun.

RECOMMENDED TOOLS AND MATERIALS

Adjustable Wrench

Channel Locks

Regular Screwdriver

Phillips Screwdriver

10'

Saber SawPipe Wrench

Tubing Cutter

Tape Measure

Electric

Drill

Hacksaw

Sealant

SAVE FOR FUTURE USE

REPAIR PARTREPAIR PART NUMBER

Mounting Kit7302054-100.0070A

Summary of content (2 pages)

PAGE 1
INSTALLATION INSTRUCTIONS Webster™ Undercounter Sinks Rectangular/Square - models #D00614, D00426 Bowen™ Undercounter Sinks Oval - models #D00495, D00496 Thank you for selecting DXV by American Standard. To ensure this product is installed properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes. ! CAUTION: PRODUCT IS FRAGILE.
PAGE 2
5 8 A Install faucet (not included) and countertop (not included) following manufacturers instructions. Mount the drain assembly (not included) on the sink, following faucet manufacturer's instructions. Be certain to apply a bead of sealing putty on the underside of the drain (Part "A") in order to ensure a watertight seal between the sink and drain. Remove excess putty after installing drain on sink. 6 NOTE: Do not use adhesives or adhesive sealants.