Installation Sheet

- 4 -
• Carefully place vanity on its back side to expose the underside/bottom
of the vanity.
• Threaded mounting holes for supplied screws are installed on both
sides of the vanity.
• Vanity legs are screwed in place with the supplied screws on each side.
NOTE: There is a Front and Rear (back) side to the legs which can be
identied by a slight opening of the upper horizontal frame, which
would be the rear.
• Once all 6 screws are installed, continue to install the vanity as per steps for
“Vanity Installation".
NOTE: Once vanity is completely secured onto cleat, it may be necessary to
adjust the leveling feet at the bottom of the legs on the oor to adjust
for height.
Vanity Legs
Model D19087000 Series
LEG INSTALLATION
NOTE: Vanity legs are optional and need
to be purchased and considered before the
actual installation of the vanity to
ensure height dimensions are correct
for water supply lines and waste drain.
In the United States:
DXV
One Centennial Avenue
Piscataway, New Jersey 08855
Attention: Director of Customer Care
For residents of the United States, warranty
information may also be obtained by calling
the following toll free number: [phone]
www.DXV.com
In Canada:
DXV
5900 Avebury Road
Mississauga, Ontario
L5R 3M3
Canada
Toll Free: 1-800-387-0369
Local: 905-306-1093
Fax: [phone]
www.DXV.ca
In Mexico:
DXV
Via Morelos 330
Col. Santa Clara Coatitla
Ecatepec, Estado de México 55540
Toll Free: 01-800-8391200
www.DXV.mx
7302420-100 Rev. A (6/2020)
REAR OF FRAME