Specification Sheet

©2015 AS America Inc. www.dxv.comRevised 6/15
FITZGERALD
®
28" PEDESTAL
LAVATORY
FINISHED
WALL
22"
(559 mm)
28"
(711 mm)
3"
(75 mm)
7-7/8"
(200 mm)
4"
(100 mm)
6-1/8"
(155 mm)
36"
(915 mm)
8"
(203 mm)
9" REF.
(228 mm)
1/2" D. (13 mm)
HOLES FOR
ANCHOR BOLTS
1-3/8" D. (35 mm)
FAUCET MOUNTING
HOLES
12-5/8"
(320 mm)
20-3/16"
(512 mm)
12-5/16"
(313 mm)
8"
(203 mm)
20-3/4"
(528 mm)
18-3/4"
(477 mm)
FINISHED
FLOOR
32-7/8"
(835 mm)
28-3/4"
(730 mm)
SUPPLIES AS
REQUIRED
1-1/4" O.D.
TAILPIECE
1-1/4" O.D.
WASTE
1-3/4" D.
(45 mm)
NOTES:
Dimension shown for location of supplies and “P” trap are suggested. Provide suitable reinforcement for all wall supports.
Pedestal anchoring screws not included
Fittings not included with fixture and must be ordered separately.
Installation Instructions supplied with lavatory and console legs.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI standards.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
FEATURES
• Fine re clay
• Faucet ledge with integral soap recess
• Recessed overow
DIMENSIONS
NOMINAL DIMENSIONS
28" x 22" x 36" (711 x 559 x 915 mm)
Pedestal back open 13-1/2" up from floor
BOWL INSIDE DIMENSIONS
20-3/16" (512 mm) wide
12-5/16" (313 mm) front to back
6-1/8" (155 mm) depth
COLORS/FINISHES
Canvas White (415), Biscuit (071)
SEPARATE COMPONENTS
D20015001.XXX 28" Single-Hole Lavatory
D20015008.XXX 28" Three-Hole Lavatory
D21015000.XXX Pedestal Base Only
COMPLIANCE CERTIFICATIONS
Meets or Exceeds ASME A112.19.2-2008/CSA B45.1-8