Specification Sheet

©2015 AS America Inc. www.dxv.com
D20125100.415 LEFT HAND
D20126100.415 RIGHT HAND
FEATURES
• Fine re clay construction
• Designed for small and unique spaces
• Includes overow
• Available as single hole only
DIMENSIONS
NOMINAL DIMENSIONS
20" x 10" x 4-3/4" (507 x 254 x 120 mm)
BOWL INSIDE DIMENSIONS
16-7/8" (429 mm) wide
6-11/16" (169 mm) front to back
4-3/8" (111 mm) depth
COLORS/FINISHES
Canvas White (415)
COMPLIANCE CERTIFICATIONS
Meets or Exceeds ASME A112.19.2/CSA B45.1
FINISHED
WALL
8"
(203 mm)
1-3/8" D.
(35 mm)
1-3/4" D.
(45 mm)
15" REF.
(380 mm)
2-1/2" D.
(64 mm) MIN.
FLAT SURFACE
10"
(254 mm)
20"
(507 mm)
4-3/4"
(120mm)
3/8" REF.
(11 mm)
2-3/4"
(70 mm)
7-7/8"
(200 mm)
3/8" D. REF.
(10 mm)
HOLES FOR
ANCHOR BOLTS
24-3/4"
(629 mm)
23"
(584 mm)
SUPPLIES AS
REQUIRED
1-1/4" O.D.
TAILPIECE
1-1/4" O.D.
WASTE
FINISHED
FLOOR
RAISED
STEP
SEAGRAM
®
RECTANGLE WALL-HUNG
LAVATORY
Revised 6/15
NOTES:
Dimensions shown for location supplies and “P” trap are suggested. Provide suitable reinforcement for all wall supports.
Slab/pedestal anchors and mounting features to be furnished by others.
Fittings not included with fixture and must be ordered separately.
Installation Instructions supplied with lavatory.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI standards.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.