Installation Sheet

- 1 -
INSTALLATION INSTRUCTIONS
SAVE FOR FUTURE USE
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
M965860 (10/17)
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing
supply stores. It is essential that the tools and materials be on hand before work has begun.
ROUGHING-IN DIMENSIONS:
• Connections are: 1/2" NPT
2-Handle Thermostatic
Rough with Volume Controls
Model: D35005511.191
* If designated with an “S”, the valve offers shared ow position
between adjacent outlets.
For use with shower heads rated at 6.6 L/min (1.75 gpm) or higher.
Thank you for selecting DXV. To ensure that your installation
proceeds smoothly, please read these instructions carefully
before you begin.
3-3/8"
(86 mm)
4"
(102 mm)
HOT
INLET
COLD
INLET
3-11/16" MIN TO 4 13/16" MAX.
(93 TO 122 mm)
FINISHED
WALL
3-1/2"
(89 mm)
3-11/16"
(94 mm)
2-9/16"
(65 mm)
9/16"
(15 mm)
1/2" NPT.
MALE
1/2" NPT.
MALE
1/2" NPT.
FEMALE
Adjustable Wrench Teon TapeChannel Locks
Tubing Cutter
Flat Blade Screwdriver
(provided)