Installation Sheet

ManualsBrandsDXV ManualsPlumbingRandall Dual Function Pressure Balanced Valve Trim With Diverter

- 1 -

INSTALLATION INSTRUCTIONS

In the United States:

DXV by American Standard

One Centennial Avenue

Piscataway, New Jersey 08855

Attention: Director of Customer Care

For residents of the United States, warranty

information may also be obtained by calling

the following toll free number: (800) 227-2734

www.DXV.com

In Canada:

DXV by American Standard

5900 Avebury Road

Mississauga, Ontario

L5R 3M3

Canada

Toll Free: 1-800-387-0369

Local: 905-306-1093

Fax: 1-800-395-1498

www.DXV.ca

In Mexico:

DXV by American Standard

Via Morelos 330

Col. Santa Clara Coatitla

Ecatepec, Estado de México 55540

Toll Free: 01-800-8391200

www.DXV.mx

Product names listed herein are trademarks of AS America, Inc.

SAVE FOR FUTURE USE

Thank you for selecting DXV by American Standard. To ensure that your installation

proceeds smoothly, please read these instructions carefully before you begin.

RECOMMENDED TOOLS AND MATERIALS

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing

supply stores. It is essential that the tools and materials be on hand before work is begun.

M965554 Rev. 1.6 (5/15)

Cross Handle

Model D35102640

Lever Handle

Model D35102600

To be used with D35000600.191

Rough Valve for Pressure Balanced Bath/Shower

Randall

Pressure Balanced

Tub/Shower Diverter Valve Trim Kit

Plumbers' Putty or Caulking

Adjustable Wrench

Channel Locks

Tubing Cutter Phillips Screwdriver

Flat Blade Screwdriver

Teon Tape

ROUGHING-IN DIMENSIONS:

• To assure proper positioning in relation to wall

note roughing-in dimensions.

• For reference

FINISHED WALL

18"

(457mm)

OPTIONAL

(102 mm)

TOP OF

TUB RIM

BOTTOM OF TUB

NOTE: ALL DIMENSIONS

ARE TYPICAL TO B/S

WITH DIVERTER

"SEE ILLUSTRATION"

OPTIONAL TO

FINISHED FLOOR

USUALLY BETWEEN

72'' AND 84"

(1829 TO 2134 mm)

1-5/8" TO 3-1/4"

(41 TO 83 mm)

7-7/8" D.

(200 mm)

SHW

TUB

LEVER CROSS

THREADED

INLETS (STOPS)

OUTLETS 1/2" NPT

5-3/4"

(146 mm)

1-3/4"

(44 mm)

INLETS 1/2" NPT

5-1/2"

(140 mm)

BOTTOM OF

SHOWER HEAD

74" FOR HEAD

CLEARANCE

(OPTIONAL)

(1880 mm)

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS Randall® Pressure Balanced Tub/Shower Diverter Valve Trim Kit Cross Handle Model D35102640 Lever Handle Model D35102600 To be used with D35000600.191 Rough Valve for Pressure Balanced Bath/Shower Thank you for selecting DXV by American Standard. To ensure that your installation proceeds smoothly, please read these instructions carefully before you begin.
PAGE 2
1 ROUGHING-IN CAUTION Turn off hot and cold water supplies before beginning. 5 NOTE: When soldering, remove PLASTER GUARD, CARTRIDGES and CHECK STOPS (IF PRESENT). When finished soldering, flush valve body, replace cartridges, check stops (if present) and plaster guard to continue installation. Use thread sealant or Teflon tape on threaded connections. 7 • See Roughing-in diagram before starting.
PAGE 3
5 ADJUST HOT LIMIT STOP (MUST BE DONE PRIOR TO TRIM INSTALLATION) By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP (1) reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP (1). • Turn CARTRIDGE STEM (2) to the OFF position (coldest setting) before making adjustment to HOT LIMIT STOP (1).
PAGE 4
Randall® Pressure Balanced Tub/Shower Diverter Valve Trim Kit MODEL NUMBERS Cross Handle D35102640 Lever Handle D35102600 Replace the “YYY” with appropriate finish code POLISHED CHROME 100 BRUSHED NICKEL 144 PLATINUM NICKEL 150 SATIN BRASS 427 A3195.191 EXTENSION KIT (CARTRIDGE) H960684.191 DIVERTER A3196.191 EXTENSION KIT (DIVERTER) H960686.XXX DIVERTER CAP A860816.XXX DIVERTER KNOB M964519-YYY0A CARTRIDGE COVER M964530-0070A TRIM PLATE HOLDER H961536.