Specification Sheet

PERCY®

SINGLE LEVER AND

VESSEL FAUCETS

• Cast brass spout and body

• Distinct, geometric handle design

• 3/8" compression braided, stainless steel exible

supply hose

• Speed Connect® with 1-1/4" drain

• Lead Free—faucet contains ≤0.25% total

lead content by weighted volume

• Maximum ow rate: 1.5 gpm (5.7 L/min)

• Low ow rate: 1.2 gpm (4.5 L/min)

CODES AND STANDARDS

Meets or Exceeds ASME A112.18.1/

CSA B125.1/NSF 61/Section 9

EPA WaterSense® High Efficiency

Lavatory Faucet Specification

Certified Compliant with 0.25% Weighted

Average Lead Content Regulations

Stem

Loop

Meets the Americans with Disabilities Act

Guidelines and ANSI A117.1 Requirements

for the physically challenged.

DESCRIPTION PRODUCT NUMBER

1.5 gpm (5.7 L/min)

Single Lever Faucet

— Loop Handle D35105104.XXX

— Stem Handle (ADA only) D35105100.XXX

Vessel Faucet

— Loop Handle D35105154.XXX

— Stem Handle (ADA only) D35105150.XXX

1.2 gpm (4.5 L/min)

Single Lever Faucet

— Loop Handle D3510512C.XXX

— Stem Handle (ADA only) D3510510C.XXX

Vessel Faucet

— Loop Handle D3510517C.XXX

— Stem Handle (ADA only) D3510515C.XXX

AVAILABLE FINISHES FINISH CODE

Polished Chrome 100

Brushed Nickel 144

ROUGH-IN DIAGRAM

SHOWN ON NEXT PAGE

PAGE 1
PERCY® SINGLE LEVER AND VESSEL FAUCETS • Cast brass spout and body • Distinct, geometric handle design •3 /8" compression braided, stainless steel flexible supply hose • Speed Connect® with 1-1/4" drain •L ead Free—faucet contains ≤0.25% total lead content by weighted volume • Maximum flow rate: 1.5 gpm (5.7 L/min) • Low flow rate: 1.2 gpm (4.5 L/min) CODES AND STANDARDS Meets or Exceeds ASME A112.18.1/ CSA B125.
PAGE 2
PERCY® SINGLE LEVER AND VESSEL FAUCETS 2-7/16" (63 mm) D. 6-3/4" (171 mm) 6-3/4" (171 mm) 8-13/16" (223 mm) 14-7/8" (378 mm) STEM HANDLE LOOP HANDLE 9-9/16" (243 mm) 4-1/2" (114 mm) 4-1/2" (114 mm) 14-1/8" (359 mm) 8-15/16" (227 mm) 2-1/4" (57 mm) 3-5/8" (92 mm) 1-1/2" (38 mm) MAX. 2-1/4" (57 mm) MOUNTING SURFACE 2" (51 mm) MAX. 12-1/2" (318 mm) 1-1/4" OD (32 mm OD) NOTE: MOUNTING HOLE 1-1/4" (32 mm) D.