Specification Sheet

EQUILITY

™

(Formerly LYNDON®)

SINGLE LEVER AND

VESSEL FAUCETS

• Cast brass spout

• Ceramic disc valve cartridge

• 3/8" compression braided, stainless steel exible

supply hose

• Lead Free—faucet contains ≤0.25% total

lead content by weighted volume

• Maximum ow rate: 1.5 gpm (5.7 L/min)

• Low ow rate: 1.2 gpm (4.5 L/min)

CODES AND STANDARDS

Meets or Exceeds ASME A112.18.1/ CSA B125.1,

NSF 61/Section 9

EPA WaterSense™ Certified

Certified Compliant with ≤0.25% Weighted

Average Lead Content Regulations

CEC and CALGreen® Compliant

DESCRIPTION PRODUCT NUMBER

1.5 gpm (5.7 L/min)

Vessel Faucet ★ D35109150.144

1.2 gpm (4.5 L/min)

Single Lever Faucet

D3510910C.XXX

Single Lever Faucet with Grid Drain

D35109152.XXX

Vessel Faucet

D3510915C.XXX

Vessel Faucet with Grid Drain

D35109151.XXX

5/18

AVAILABLE FINISHES FINISH CODE

Polished Chrome 100

Brushed Nickel 144

Matte Black 243

ROUGH-IN DIAGRAM

SHOWN ON NEXT PAGE

Meets the Americans with Disabilities Act

Guidelines and ANSI A117.1 Requirements

for the physically challenged.

★DISCONTINUED. Available while supplies last.

CALGreen® is a registered trademark of

California Building Standards Commission.

PAGE 1
EQUILITY ™(Formerly LYNDON®) SINGLE LEVER AND VESSEL FAUCETS • Cast brass spout • Ceramic disc valve cartridge •3 /8" compression braided, stainless steel flexible supply hose •L ead Free—faucet contains ≤0.25% total lead content by weighted volume • Maximum flow rate: 1.5 gpm (5.7 L/min) • Low flow rate: 1.2 gpm (4.5 L/min) CODES AND STANDARDS Meets or Exceeds ASME A112.18.1/ CSA B125.1, NSF 61/Section 9 EPA WaterSense™ Certified Certified Compliant with ≤0.
PAGE 2
EQUILITY ™(Formerly LYNDON®) SINGLE LEVER AND VESSEL FAUCETS D35109150 D3510915C 7" (176 mm) 1-5/8" (42 mm) 3-5/8" (92 mm) D3510910C 7" (176 mm) 1-5/8" (42 mm) 3-5/8" (92 mm) 11-1/2" (291mm) 9-3/8" (239 mm) 5-3/4" (146 mm) 2-3/8" (60 mm) 3-11/16" (93 mm) 2-1/8" DIA. (54 mm) 2-3/8" (60 mm) 2" MAX. (51 mm) 2-1/8" DIA. (54 mm) 7" (176 mm) 2" MAX. (51 mm) 7" (176 mm) 1-1/4" (32 mm) 1-1/4" (32 mm) NOTE: MOUNTING HOLES ARE 1-3/8" D.