Installation Guide

ManualsBrandsDXV ManualsPlumbingDXV Modulus 7-13/16" Tub Spout

- 1 -

INSTALLATION INSTRUCTIONS

SAVE FOR FUTURE USE

RECOMMENDED TOOLS AND MATERIALS

Most of the procedures require the use of common tools and materials, which are available from hardware and plumbing,

supply stores. It is essential that the tools and materials be on hand before work is begun.

Product names listed herein are trademarks of AS America, Inc.

M965844 (6/17)

Model D35120760

DXV Modulus

™

Wall Tub Spout

ROUGHING-IN DIMENSIONS:

• For reference

SPOUT

ADAPTER

FINISHED

WALL

1/2" TO 3/4" THREAD

ENGAGEMENT

1/2" or 3/4" NPT

(13 or 19 mm)

2 9/16"

(65 mm)

1-1/8"

(29 mm)

7 13/16"

(199 mm)

9 5/8"

(244 mm)

9/16" (15 mm)

Plumbers' Putty or Caulking

Phillips Screwdriver

Flat Blade Screwdriver

Hex Wrench

(Supplied)

In the United States:

DXV

One Centennial Avenue

Piscataway, New Jersey 08855

Attention: Director of Customer Care

For residents of the United States, warranty

information may also be obtained by calling

the following toll free number: (800) 227-2734

www.DXV.com

In Canada:

DXV

5900 Avebury Road

Mississauga, Ontario

L5R 3M3

Canada

Toll Free: 1-800-387-0369

Local: 905-306-1093

Fax: 1-800-395-1498

www.DXV.ca

In Mexico:

DXV

Via Morelos 330

Col. Santa Clara Coatitla

Ecatepec, Estado de México 55540

Toll Free: 01-800-8391200

www.DXV.mx

Thank you for selecting DXV. To ensure that your

installation proceeds smoothly, please read these

instructions carefully before you begin.

Summary of content (2 pages)

PAGE 1
INSTALLATION INSTRUCTIONS DXV Modulus™ Wall Tub Spout Model D35120760 Hex Wrench (Supplied) Phillips Screwdriver Plumbers' Putty or Caulking Flat Blade Screwdriver ROUGHING-IN DIMENSIONS: • For reference FINISHED WALL 9 5/8" (244 mm) 2 9/16" (65 mm) 9/16" (15 mm) 1-1/8" (29 mm) 7 13/16" (199 mm) In the United States: DXV One Centennial Avenue Piscataway, New Jersey 08855 Attention: Director of Customer Care For residents of the United States, warranty information may also be obtained by calling th
PAGE 2
1 REMOVE SPOUT ADAPTER 2 REMOVE PIPE CAP CAUTION: Protect finish on TUB SPOUT when installing. • Remove PIPE CAP. Apply sealant to pipe nipple. With a 1/2" hex wrench thread SPOUT ADAPTER (3) onto pipe nipple. • To install TUB FILLER SPOUT (1) first remove SET SCREW (2) and pull SPOUT ADAPTER (3) from back of TUB FILLER SPOUT (1). 1 PIPE CAP APPLY SEALANT 3 3 2 3 INSTALL SPOUT 4 SECURE SPOUT • The SPOUT ADAPTER (3) should extend 1-1/2" from finished wall.