Owner's Manual

GT 90D T r eadmill
8
9
125
102
4
5
GT 90D Assembly Instructions
4
Crossbar Installation
Hardware Step 4
1. Install Handrail Support (No.9) between Left and Right Uprights (No.4/5) and use
Combination M5 Allen Wrench & Phillips Head Screw Driver (No.102) to tighten 4
Button Head Socket Bolts (No.125).
5
Handlebar Covers
1. Install the Front Inner Handlebar Cover (L,R) (No.107,110) and Right and Left
Uprights with the 4 Sheet Metal Screws (No.74) by using Combination M5 Allen
Wrench & Phillips Head Screw Driver (No.102) and tighten them.
Hardware Step 5
#102. Combination M5
Allen W rench & Phillips
Head Screw Driver
#74. 3.5 × 12mm Sheet
Metal Screws (4pcs)
#102. Combination M5
Allen W rench & Phillips
Head Screw Driver
#125. 5/16” × 3/4”
Button Head Socket
Bolts (4pcs)