Owner's Manual

GT 90D T r eadmill
31
7. Walk on the belt at a moderate speed for 5 minutes to evenly distribute the lubricant along
the treadmill belt and deck.
8. Your treadmill belt is now lubricated. Normal use can resume.
To clean your treadmill belt:
1. Ensure that your machine is off, and that the power cord is unplugged to minimize risk of
injury.
2. Grab one edge of the treadmill belt, and lift slightly to expose the area between the top of
the treadmill base and the running belt.
3. Do a visual check for any dirt or debris accumulation.
4. Should dirt and debris be present, slide a towel or cleaning cloth between the treadmill
belt and top of the treadmill base until you can grasp one end on each side. (The cleaning
cloth should be longer than the running belt is wide to achieve this.)
5. Using both hands, drag the cleaning cloth up and down the length of the treadmill base
1-2 times.
6. For excessive dirt accumulation, rotate the belt halfway, and repeat step 5. Continue until
your cleaning cloth is no longer picking up any dirt.
7. Remove cleaning cloth from treadmill before plugging back in.