Use and Care Manual

Sun Paints & Coatings • 4701 East 7th Ave • Tampa, FL 33605-4701
Phone: [phone] • Facsimile: 813-367-0263 • www.suncoatings.com
G-14
R-1
DYC1380
SHIELD & SEAL POLYURETHANE WATER-PROOFING SEALER
1380 Data Sheet
CHARACTERISTICS
Dyco SHIELD & SEAL is a solvent based polyurethane
water proong sealer designed to seal and protect epoxy
bonded, natural stone surfaces such as Chattahoochee
Stone, River Rock, and their supporting members such as
retainer and expansion joints. It seals and helps protect
them from standing water and moisture intrusion.
RECOMMENDED USES
Chattahoochee Stone and River rock Surfaces usually
found in driveways, walkways, patios and pool decks.
FEATURES/BENEFITS
•
Seals and Protects Surfaces
•
Resistant to Moisture Penetration
•
Resistant to Abrasion
•
Resistant to Grease, Oil and Detergent.
SPECIAL NOTES
It is essential that surfaces be clean before applying.
Apply with a phenolic core solvent roller nap. Do not ap-
ply to damp or dewy surfaces or when the temperature is
below 50°F (10°C).
FOR ADDITIONAL INFORMATION
See MSDS or call toll-free 1-800-282-7901.
TECHNICAL DATA
Vehicle Type ...................... Oil Modied Urethane
Finish/Sheen .................... Gloss
Solids by Weight ................ 46% ± 1%
Solids by Volume ............... 39% ± 1%
Viscosity ........................... Zahn Cup - 18.23 Seconds
VOC
(less exempt solvents)
............. 418 g/L.
Weight per Gallon .............. 7.36lbs.
COVERAGE
150-200 S.F./Gal. @ 1.0 mils DFT
(Actual coverage may vary depending on type of sub-
strate, and application method.)
KEY ATTRIBUTES
Application Temperatures: 50 - 110°F (10 - 43.33°C)
Application Tools: Brush, Roller, or Spray
Dry Times: Touch - 20 Minutes; Recoat – 1 Hour
(Dry Time Based on 77°F (25°C), 50% RH)
Thinner: Do Not Thin
Clean Up: VM&P Naptha