Use and Care Manual

Sun Paints & Coatings / Dyco Paints • 5850 Ulmerton Road • Clearwater, FL 33760
Phone: 1.800.282.7901 • Facsimile: 727.536.0561 • www.SunPaintsAndCoatings.com
DYC315X
DYCO WATER BASED POOL PAINT
3150 and 3151 Data Sheet
CHARACTERISTICS
DYCO Pool Paint WB is a waterbased pool paint with supe-
rior lm properties designed to provide a highly resistant
nish on concrete, plaster and masonry surfaces with the
ability to seal hairline cracks. Formulated with Ultraviolet,
Infrared, and harsh pool chemical inhibitors.
RECOMMENDED USES
Concrete
Marcite
Plaster
FEATURES/BENEFITS
Excellent Color Retention - Fade Resistance
Resistant to Peeling, Cracking and Blistering
Durable in Fresh or Salt Water
Chemical and Stain Resistant
Self Priming on Bare Concrete, Plaster or Marcite
Excellent Waterproof Characteristics
SPECIAL NOTES
DYCO Pool Paint requires a two coat application. For best
results, do not thin. Do not apply if heavy dew or rain is ex-
pected within 12 hours. Surface must be 100% dry before
application. For a non-skid surface, add DYCO Skid Gard
#45 skid resistant texture additive. Follow all label instruc-
tions for preparation and application of Dyco Pool Paint.
FOR ADDITIONAL INFORMATION
See SDS or call toll-free 1-800-282-7901.
TECHNICAL DATA
Vehicle Type ...................... Acrylic
Finish/Sheen .................... Semi-Gloss
Solids by Weight ................ 54%
Solids by Volume ............... 42%
Viscosity ........................... 88 KU
VOC
(less exempt solvents)
............. 88 g/L.
Weight per Gallon .............. 10.44bs.
COVERAGE
250 Sq Ft. /Gal @ 5.25 mils WMT - 2.2 mils DFT
(Actual coverage may vary depending on type of sub-
strate, and application method.)
AVAILABLE COLORS
3150 White
3151 Blue
KEY ATTRIBUTES
Application Temperatures: 50 - 110°F (10 - 43.33°C)
Application Tools: Brush, Roller or Airless
Dry Times: Touch - 1 Hour; Recoat – 8 Hour
(Dry Time Based on 77°F (25°C), 50% Relative Humidity)
Do not ll pool before paint is cured. Allow a minimum of
ve (5) days after teh nal coat before lling pool.
Thinner: Do Not Thin
Clean Up: Soap and Water
PHYSICAL PROPERTIES
Perm ................................ <10 Perms
Tensil Strength .................. 275 PSI
Flash Point ........................ 245°F (118°C)
E-16
R-1

Summary of content (2 pages)