Instructions / Assembly

Sun Paints & Coatings / Dyco Paints • 5850 Ulmerton Road • Clearwater, FL 33760
Phone: [phone] • Facsimile: 727.536.0561 • www.SunPaintsAndCoatings.com
TUFF COAT OPAQUE CONCRETE COATING
7910-7930, 8000-8097, and 9000-9010 Data Sheet
B-15
R-1i
DYC79XX-DYC80XX
CHARACTERISTICS
TUFF COAT Concrete Stain/Enamel is a low VOC water reducible
acrylic concrete stain with superior lm properties, formulated to
provide a low sheen & hard protective nish. There are 13 factory
colors and tint bases to make any custom color. Tuff Coat is ideal
for its intended uses and easy to apply.
RECOMMENDED USES
•
Masonry Pool Decks
•
Masonry Patios and Balconies
•
Masonry Walkways
•
Garage Floors and Carport Parking Decks
•
Concrete and Asphalt Driveways
•
Concrete Wall Caps
FEATURES/BENEFITS
•
Adheres to Bare or Painted Concrete Surfaces
•
Unlimited Color Selection
•
Fast Drying and Easy to Apply
•
Resists Cracking and Peeling
•
Resists Mildew
•
Resists Fading
•
Easy Soap and Water Clean Up
AVAILABLE COLORS
White and Custom Colors
RECOMMENDED PRIMERS
Concrete Floors ...................... 9040 (8 Hour Cure Required)
Driveways .............................. 9040 (8 Hour Cure Required)
Pool Decks ............................ 9040 (8 Hour Cure Required)
SPECIAL NOTES
NOTE: Existing painted surfaces must be cleaned and deglossed.
Not recommended for wood decks.
SLIPPERY WHEN WET
If the surface to be coated is exposed to water from rain, sprin-
klers, pools or by other means or if the surface is an inclined
plane, such as a ramp or if concrete steps are being coated,
Dyco recommends mixing SKID GARD #45 at 0.2lbs per gallon.
If SKID GARD #45 is not avaliable, see your paint specialist for
a recommendation of a suitable aggregate to be used at 0.2lbs
per gallon.
FOR ADDITIONAL INFORMATION
See MSDS or call toll-free 1-800-282-7901.
TECHNICAL DATA
Vehicle Type ........................... Waterborne Acrylic
Finish/Sheen ......................... Low
Solids by Weight ..................... 40.16%
Solids by Volume .................... 28.48%
Viscosity ................................ 85 ± 2 KU
VOC
(less exempt solvents)
.................. 40 g/L.
Weight per Gallon ................... 9.94lbs.
PHYSICAL PROPERTIES
Abrasion Resistance (ASTM D968) ............. No Coating Loss
Water Vapor Transmission
(ASTM D1653 Method DB Condition C) ................. 12 Perms
Hot Tire Resistance (ASTM WK14355) ......................... Pass
Salt Spray Resistance
(ASTM B117 3,000 Hrs.) ............................................ Pass
QUV Resistance (ASTM D4587 2,000 Hrs.) .................. Pass
Fungal Resistance (ASTM D3273) ........................ Rating 10
Freeze Thaw Resistance (AASHTO R31) ........................ Pass
Static Co-Efcient of Friction (COF) ............................... 0.85
Hardness (SHORE A) ................................................... 40+
COVERAGE
175 to 225 Sq.Ft./Gal.
(Actual coverage may vary depending on type of substrate, and
application method.)
AVAILABLE COLORS
7910 Bombay 7920 Charcoal Grey
7930 Cement 8000 Gulf Grey
8010 Deck Grey 8020 Palm Green
8030 Forrest Green 8040 Sand Beige
8050 Cordova Brown 8060 Terra Cotta
8065 Brick Red 9000 Black
9010 White
AVAILABLE BASES
8080 Tint Base 8090 Deep Base
8095 Ultra Deep Base 8097 Neutral Base
KEY ATTRIBUTES
Application Temperatures: 50 - 110°F (10 - 43.33°C)
Application Tools: Roller, or Spray
Dry Times: Touch - 2Hour Recoat – 4Hour Vehicle Trafc 72Hour
(Dry Time Based on 77°F (25°C), 50% RH)
Thinner: Do Not Thin
Clean Up: Warm Soapy Water
NOTE: Allow 30 Days Curing Before Washing
PHYSICAL PROPERTIES
Mildew Resistance ................. Excellent
Flash Point ............................. 247°F (118.33°C)
CERTIFICATIONS:
Spec TT-C-555B/ASTM D 6904: Passed
GS-11: VOC Compliant in all Regulated Areas