MSDS

MATERIAL SAFETY DATA SHEET
Date Issued :10/11/2013 Page 1 of 2
DY-9040 TUFF GRIP BONDING PRIMER
SECTION I – COMPANY AND PRODUCT IDENTIFICATION
MANUFACTURERS NAME
DYCO PAINTS, INC.
STREET ADDRESS
5850 ULMERTON RD.
CITY, STATE, AND ZIP CODE
CLEARWATER, FL 33760
EMERGENCY TELEPHONE NUMBER PRODUCT INFORMATION
1-800-424-9300 CHEMTREC 813-367-4444
PRODUCT CLASS
EPOXY
MANUFACTURES CODE IDENTIFICATION
DY-9040
TRADE NAME
TUFF GRIP BONDING PRIMER
SECTION II- HAZARDOUS INGREDIENTS
INGREDIENT
PERCENT
TLV
PPM
PEL-TWA
PPM
AMMONIA CAS # - 7664-41-7
1.0 %
25
35
MICA CAS # - 12001-26-2
5.0 %
3
20
EPOXY RESIN PROPRIETARY
32.0 %
ND
ND
WATER CAS # - 7732-18-5
56.0 %
ND
ND
NEPHELINE SYENITE CAS # - 37244-96-5
1.0 %
5
10
BUTYL CELLOSOLVE CAS # - 111-76-2
5.0 %
20
50
ND = NO DATA
SECTION III – PHYSICAL DATA
BOILING RANGE: 315 ºF
VAPOR DENSITY: HEAVIER
THAN AIR
VAPOR PRESSURE:0.1mm @ 68°F
Appearance: White
Odor: Slight
VOC: 337 g/l
EVAPORATION RATE:
1.3 (Butyl Acetate = 1)
PERCENT VOLATILE
BY VOLUME 75 %
WEIGHT PER GALLON
8.67 LBS
SOLUBILITY IN WATER: 100.0%
PHYSICAL STATE: Liquid
Ph: 8.5
SECTION IV – FIRE AND EXPLOSION HAZARD DATA
FLASH POINT = 180 F
EXPLOSION HAZARD: Not Applicable
EXTINGUISHING MEDIA- CARBON DIOXIDE, FOAM, & DRY CHEMICAL
UNUSUAL FIRE AND EXPOLSION HAZARDS- CLOSED CONTAINERS MAY EXPLODE WHEN EXPOSED TO EXTREME
HEAT. PRODUCTS OF COMBUSTION MAY BE TOXIC
SPECIAL FIRE FIGHTING PROCEDURES- WEAR SELF CONTAINED BREATHING APPARATUS. WATER MAY BE USED
TO COOL CLOSED CONTAINERS. HIGH PRESSURE STREAM WILL SPREAD FIRE.
SECTION V – REACTIVITY DATA
STABILITY:
STABLE
CONDITIONS TO AVOID: STORE AWAY FROM STRONG OXIDIZING MATERIALS.
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE: STORE IN A COOL, DRY PLACE. KEEP
CONTAINER CLOSED WHEN NOT IN USE. PROTECT FROM FREEZING.
HAZARDOUS DECOMPOSITION PRODUCTS: CARBON OXIDES AND TRACES OF INCOMPLETELY BURNED
CARBON COMPOUNDS.
HAZARDOUS POLYMERIZATION:
WILL NOT OCCUR