Installation Guide

4
Step 4: After the faucet is properly positioned, thoroughly tighten the screws on the
mounting nut to secure the faucet in place. Should your faucet have a pull-out
hose, attach the end of it (1) to the line converter (2).
Step 5: If a weight is provided as a component of your faucet’s assembly, disassemble
it with use of a Phillips screwdriver. Once the weight is separated, attach the
weight (1) onto the pull-out hose (2) at a desired location. Note: The weight
should NOT make contact with the faucet line hoses when the faucet head is
pulled out.
Diagram 6
Diagram 5
Pull-Out/Down Kitchen Faucet Installation Instructions
1
2
1
2
Screw