Installation Guide

Reminder
12 Water temperature control.
Press to set water temperature. The
temperature shows as a concrete numerical
value, When temperature value is between
30-39,wate r w ill be heate d a ccording to
your setting. When temperature value is 00,
water will not be heated,Press to change
temperature value, and the value will show
on the LED panel of remote controller
and LED displayer.
When the remote control
displayer and toilet LED screen
do not show the temperature,
which mean the heating function
is turn off.
Press button, turn on deodorization.
When you sit on the toilet seat, it will
work itself.
14 Deodorization function.
Under drying, deodorization will stop,
after finish drying, it will work again,
and last 1.5mins after you leave
the seat.
Reminder
13 Seat temperature control.
Press to set seat temperature.The
temperature shows as a concrete numerical
value, When temperature value is between
30-39,seat will be heated according to your
setting. When temperature value is 00,seat
will not be heated, Press to change
temperature value, and the value will show
on the LED panel of remote controller
and LED displayer.
7. Dryer Function
Warm air is blown to dry the area
washed by the shower.
(Shows on remote control)
8.Warm air dryer adjustable button
Five-dryer setting for choosing.adjust
comfortable air drying by pressing.
(Shows on remote control)
9.Drying hole position adjustment
Under drying, there are 5-drying
setting offered, the dryer hole can
be adjusted by press button
Stop warm air dryer, or it will
automatically stop after 4 mins.
10.Stop
Press then flows out water to clean nozzle.
Nozzle self cleaning is available while no one sits on the toilet.
It will clean nozzle automatically before rear and front wash.
11.Nozzle self-cleaning
11 12