Specification

ManualsBrandsDyconn ManualsBathRoyal 36 in. x 30 in. LED Wall Mounted Backlit Vanity Bathroom LED Mirror with Touch On/Off Dimmer

Product Features:

Frameless backlit Mirror

Extra thick frosted LED light

Can be vertical or horizontal hanging

Touch switch on & oﬀ

Touch switch dim function

Anti-fog pad

LED Backlit Mirror

Sizes: 12” W x 16“ H (horizontal or vertical)

24” W x 32”H (horizontal or vertical)

30” W x 36”H (horizontal or vertical)

Model: Catella M09AT, Royal M12At, Edison M13AT, Swan M14AT

Thoroughly read all instructions before installing the enclosed product.

Read and take note of all safety, care, and maintenance information.

E491008

Summary of content (8 pages)

PAGE 1
Product Features: Frameless backlit Mirror Extra thick frosted LED light Can be vertical or horizontal hanging Touch switch on & oﬀ Touch switch dim function Anti-fog pad LED Backlit Mirror Sizes: 12” W x 16“ H (horizontal or vertical) 24” W x 32”H (horizontal or vertical) 30” W x 36”H (horizontal or vertical) Model: Catella M09AT, Royal M12At, Edison M13AT, Swan M14AT Thoroughly read all instructions before installing the enclosed product.
PAGE 2
E491008
PAGE 3
Product Features: Frameless backlit Mirror Extra thick frosted LED light Can be vertical or horizontal hanging Touch switch on & oﬀ Touch switch dim function Anti-fog pad Model: Catella M09AT Package Content: LED backlit Mirror Screws Studs Mounting bracket Metal back frame 5 mm silver mirror Frosted Mirror Bracket Screw x 3pcs Vertical Mounting OR Horizontal Mounting Power cord Touch switch Rubber gasket Note: Only one mounting bracket is available , please choose either vertical or horizontal Mount
PAGE 4
Model: Royal M12AT Metal back frame 5 mm silver mirror Frosted Mirror Bracket screw x 3pcs Vertical Mounting OR Horizontal Mounting Power cord Touch switch Rubber gasket Model: Edison M13AT Metal back frame 5 mm silver mirror Frosted Mirror Bracket screw x 3pcs Vertical Mounting OR Horizontal Mounting Power cord Touch switch Rubber gasket Note: Only one mounting bracket is available , please choose either Vertical or Horizontal Mounting E491008
PAGE 5
12.0'' 0.8'' 0.6'' 5 mm silver mirror 16.0'' Frosted Mirror Touch switch 16.
PAGE 6
Step 1: Using a I-Beam level to mount the included mounting bracket with 3 screws (using anchor when its installing on drywall, concrete or Tile surface). Step 2: Make sure the circuit breaker for the power source of the mirror is off. The connect the neutral (White), hot (black) and ground (copper wire or Green) wire between the mirror and the junction box. Step 3: Hang the mirror with desired placement (vertical or Horizontal) by placing the mirror’s cut out on to the mounting bracket.
PAGE 7
Manufacturer Limited Warranty All Dyconn Faucet products are manufactured and tested with the highest quality standards and rigorous quality control process. This warranty is limited to the non-commercial use of Dyconn Faucet products purchased and installed in the United States and Canada.
PAGE 8