Use and Care Manual

Installation Steps
www.dyconnfaucet.com
First, you have to decide horizontal or vertical hanging on your wall.
It is advisable to have two people finish the installation.
Horizontal Mounting
1. One person holds the mirror side, and another person holds the back frame.
Pull the bottom of the glass out from the back frame and lift up to separate these
two parts.
2. Using a I-Beam level to mount the (using anchor when its installing on drywall,
concrete or Tile surface). back frame onto the wall.
3. Make sure the circuit breaker for the power source of the mirror is o. Then
connect the neutral (White), hot (black) and ground (copper wire or Green) wire
between the mirror and the junction box.
4. Hang the mirror with horizontal mount by placing top of the mirror’s side on to
the mounting bracket in the metal frame. Then Push the bottom of the mirror to
lock the mirror onto the catch lock.
5. Test the mirror.