Use and Care Manual

www.dyconnfaucet.com
Vertical Mounting
1. One person holds the mirror side, and another person holds the back frame.
Pull the bottom of the glass out from the back frame and lift up to separate these
two parts.
2. Remove the two horizontal mount on the back frame side. Screw the horizontal
mount onto the holes for vertical mount. Remove the two catch lock located
within the bottom of the metal frame by removing its screw.
3. Using a I-Beam level to mount (using anchor when its installing on drywall,
concrete or Tile surface) back frame onto the wall.
4. Make sure the circuit breaker for the power source of the mirror is o. The
connect the neutral (White), hot (black) and ground (copper wire or Green) wire
between the mirror and the junction box.
5. Hang the mirror with vertical mount by placing the mirror’s side on to the
mounting bracket, two L hooks on the glass should latch to the mounts on the
frame. There is no catch lock needed for vertical mounting.
6. Test the mirror.
Vertical Mount
HandlesLock catch
(Horizontal
hanging only)
Horizontal Mount