New Kitchen Manual.
New Kitchen Manual.
Table of Contents Table of Contents Product Specifications & Information.............................................4 Complete Product Expanded View..........................................................4 Models: TB001-A03CHR, TB001-A03BN, TB001-A03ORB...................4 Models: CA2H04-CHR, CA2H04-ORB...................................................5 Kitchen Faucet Installation Steps....................................................
Product Specifications Product & Information Description & Helpful Tips Complete Product Expanded View Model: TB001-A03CHR, TB001-A03BN, TB001-A03ORB 6 5 4 3 2 1 7 8 9 10 11 18 12 13 14 15 16 17 19 20 21 22 28 23 24 25 29 26 27 30 www.dyconnfaucet.com New Kitchen Manual.
Product Specifications & Information Complete Product Expanded View Model: CA2H04-CHR, CA2H04-ORB 3 2 1 4 23 5 6 22 7 21 8 9 10 20 19 11 12 1.Aerator cover 2.Aerator 3.Gasket 4.Spout Assembly 5.Trim Ring 6.Plastic Washer 7.Plastic Washer 8.O-ring 9.Plastic Washer 10.Plastic Washer 11.Connector 12.O-ring 13.Locknut 14.Gasket 15.Mounting Shank 16.O-ring 17.Body-1 18.Body-2 19.Cartridge Seat 20.Cartridge 21.Cartridge Nut 22.Trim Cap 23.Handle 24.
Kitchen Faucet Installation Steps Kitchen Faucet Installation Installation Steps for Models: TB001-A03CHR, TB001-A03BN, TB001A03ORB 1. Remove the rubber washer, metal washer and mounting nut from the faucet shank. 2. Install the faucet shank through the deck hole. Next, re-attach the rubber washer and metal washer onto faucet shank, followed by the thorough tightening of the mounting nut onto the shank. www.dyconnfaucet.com New Kitchen Manual.
Kitchen Faucet Installation Steps Kitchen Faucet Installation Installation Steps for Models: TB001-A03CHR, TB001-A03BN, TB001A03ORB 3 Inches 3. To install the weight, pull out the hose to a desired length. From underneath the deck, attach the weight onto the pull-out hose, allowing a clearance of 3-inches from the faucet inlet ports. 4. Next, screw and tighten the water line hoses onto the faucet inlet ports. 7 New Kitchen Manual.indd 7 www.dyconnfaucet.
Kitchen Faucet Installation Steps Kitchen Faucet Installation Installation Steps for Models: TB001-A03CHR, TB001-A03BN, TB001A03ORB 5. Apply Teflon tape on the threading of each water valve. Connect both hot and cold water line hoses onto each water valve and securely tighten each mounting nut. 6. After installing the faucet, remove the faucet head assembly and open the hot and cold water supply lines. Check for leaks. Turn on the faucet handle for one minute to flush debris from the faucet.
Vessel Faucet Installation Steps Vessel Faucet Installation Installation Steps for Models: CA2H04-CHR, CA2H04-ORB 1. Remove the washer and mounting nut from the faucet. 2. Screw and tighten both hot and cold water line hoses to the faucet. 9 New Kitchen Manual.indd 9 www.dyconnfaucet.
Vessel Faucet Installation Steps Vessel Faucet Installation Installation Steps for Models: CA2H04-CHR, CA2H04-ORB 3. Install the faucet through the deck hole and screw and tighten the mounting nut onto faucet shank. 4. Apply Teflon tape on the threading of each water valve. Connect both hot and cold water line hoses onto each water valve and securely tighten each mounting nut. www.dyconnfaucet.com New Kitchen Manual.
Vessel Faucet Installation Steps Vessel Faucet Installation Installation Steps for Models: CA2H04-CHR, CA2H04-ORB 5. After installing the faucet, remove the aerator assembly and open the hot and cold water supply lines. Check for leaks. Turn on the faucet handle for one minute to flush debris from the faucet. Close the handles and re-assemble the aerator. 11 New Kitchen Manual.indd 11 www.dyconnfaucet.
Manufacturer Limited Warranty All Dyconn Faucet products are manufactured and tested with the highest quality standards and rigorous quality control process. This warranty is limited to the non-commercial use of Dyconn Faucet products purchased and installed in the United States and Canada.
New Kitchen Manual.
New Kitchen Manual.
