Specification

Note: Your faucet is designed for a hole with a diameter of 1 1/4” (30mm) and a deck

thickness of up to 2” (50mm). The soap dispenser hole should not be larger

than 1 1/2”.

Please shut o water valves before conducting faucet assembly.

Step 1: Unscrew the shank (1) from the faucet (if it is connected) and place it to the

side, along with the gasket (2) and mounting nut (3).

Diagram 2

Diagram 1

Installation Instructions

2” (50mm)

1.25” (30mm)

<1.5” (38mm)