Specification

6
Step 4: After the faucet is properly positioned, thoroughly tighten the mounting nut to
secure the faucet in place. At this point, attach the end of the pull out hose (1)
to the line converter (2).
Step 5: Disassemble the weight with use of a Phillips screwdriver. Once the weight is
separated, attach the weight (1) onto the pull out hose (2) at your desired
location. Note: The weight should NOT make contact with the faucet line hoses
when the faucet head is pulled out.
Diagram 6
Diagram 5
Installation Instructions
1
2
1
2
Screw