Specification

9
Step 1: Remove soap canister (1), gasket (2) and mounting nut (3) from the soap
dispenser’s shank (4). Place the soap dispenser (5) into the deck opening. From
underneath the sink deck, attach the Gasket and mounting nut onto the faucet
shank. Before tightening and securing the mounting nut, make certain the soap
dispenser is properly positioned.
Step 2: After the soap cannister is lled with liquid soap, from underneath the sink,
screw the soap cannister onto the soap dispenser’s shank. Note: The soap
cannister accommodates 8oz. of liquid soap. To clean, reverse the assembly
process and lter hot water through the soap dispenser to dissolve residual
soap build-up.
Diagram 2
Diagram 1
Soap Dispenser Installation
1
4
5
2
3