Installation Guide

4
Note: Your faucet is designed for a hole with a diameter of 1 1/4” (30mm) and a deck
thickness of up to 2” (50mm).
Please shut o water valves before conducting faucet assembly.
Step 1: Unscrew the shank (1) from the faucet (if it is connected) and place it to the
side, along with the base (2), gasket (3), washer (4) and mounting nut (5).
Diagram 2
Diagram 1
Installation Instructions
1
3
4
5
2
2” (50mm)
1.25” (30mm)