Installation Guide

6
Step 4: Install the rubber gasket (1) and washer (2). Screw the mounting nut (3)
onto the faucet shank. Secure the mounting nut and faucet into place by
tightening the mounting nut screws.
Step 5: During faucet installation, lings, chips, and other debris can fall into the
plumbing pipes. This debris can damage the internal faucet surfaces which
can cause leakage. Before turning on the water valves, make sure the faucet
handle is in the open (On) position in order to thoroughly ush out debris.
Diagram 6
Diagram 5
Installation Instructions
1
3
2