User's Manual Part 1


WWW.DYEPAINTBALL.COM
AUTO SHUT OFF
Values 10 – 60 min (Factory Default 10 min)
The board will automatically shut down if the marker is not used for a
set period of time. You can adjust the shut off time.
RESET
RATE OF FIRE PEAK/AVERAGE
The peak rate of fi re is the shortest amount of time between any two
shots in a stream of shots.
The average rate of fi re is the average ROF in a stream of shots.
SCREEN BRIGHTNESS
Control the screen brightness for better visibility of the screen
SCREEN SLEEP
Values 15 sec - 10 min (Factory Default 1 min)
The screen will go to sleep after a predetermined amount of time. This
is to conserve battery life when playing. To activate the screen tap the
Joystick in any direction.
AUDIO
(Factory Default ON)
turn the sound off or on for navigation . The game timer alarm cannot
be turned off.
PRESSURE GAUGES
The M2 is equipped with internal pressure sensors that monitor the
Low and High pressures in the marker. Once the Gauge screen is
displayed press the center of the joystick to get a live reading.
The M2 operating pressures will vary depending on weather
conditions, paint size, and desired velocity.
High Pressure should be set between 110psi and 170 psi.
For adjustment instructions see page 17.
Low Pressure should be set between 50psi and 75psi. For adjustment
instructions see page 19.
The screen will read “Processing” and display HP and LP psi. When
done, press the center of the joystick, and continue to scroll through the
Data Settings menu.
Use the color coded gauges to help keep your M2 within standard
operating levels.
To exit the live reading screen press the center of the Joystick again.
METHOD OS AIR (MOSair)