User's Manual Part 1

12
WWW.DYEP A I NTBALL. C O M
CUSTOM BOOT SCREEN INSTALL
provides remarkable detail and image resolution. Before you can download a photo onto
the board it will fi rst need to be converted to a .bmp fi le sized 128 x 128 pixels. You can use
any number of free online programs such as the one listed below to convert your photo. http://
image.online-convert.com/convert-to-bmp
• Choose the fi le you wish to convert.
• Change size to 128 pixels x 128 pixels.
• Click convert fi le.
• The
.bmp fi les must be saved with specifi cfi le name so that the M2
can accurately identify and store them.
Custom boot screen #1 FIlE NAME = m2cbs1
Custom boot screen #2 FIlE NAME = m2cbs2
Custom boot screen #3 FIlE NAME = m2cbs3
• Each free boot screen space is labeled with the associated fi le name.
• Save new .bmp fi le to your Customer Support Passport or any
standard fl ash drive.
• Plug the fl ash drive int
o the upgrade cable (supplied with your M2).
• Plug the cable into your M2, use the same port you use to charge
your battery.
• To access the M2’s micro USB port open the dust cover labeled USB on
the upper left side of the grip. Lift and rotate the cover out of the way.
• Power on your M2, the USB sync screen will be displayed.
• Press the Center of the joystick to initiate the upgrade process.
• Select Upgrade Custom Boot Screen.
• C
•
onfi rm you wish to Upgrade Custom Boot Scr
r
een.
.
• The system will begin to download the fi le.
• Do not unplug the cable until you are prompted to do so.
• Once the cable has been unplugged the board will automatically
power . This signifi es the upgrade is done, and the M2 is ready
for use.
• Power up M2 access Select Boot Screen in the Data settings menu
and select our new custom boot screen.
Upgrade
Cable
SELECT CUSTOM
BOOT SCREEN
m2 c b s 1
m2 c b s 2
m2 c b s 3