User's Manual Part 1


WWW.DYEPAINTBALL.COM
AVERAGE RATE
OF FIRE
HYPER 5 PRESSURE
SERVICE SCHEDULE
DWELL SETTING
SELECTED PROFILE
ANTI BOLT STICK
STATUS
LPR PRESSURE
PEAK RATE
OF FIRE
SHOT COUNTER
BATTERY LEVEL
BT CONNECTION
STATUS
COUNT DOWN
GAME TIMER
FIRING MODE
TOURNAMENT LOCK
SELECTED PROFILE
SHOT COUNTER
RATE OF FIRE
EYE SYSTEM STATUS
PLAY SCREEN
You are able to select between 3 play screens depending on what information you wish
to have displayed. Option 1 is the default setting, for more play screen options see Select
Play Mode Screen under Data Settings (page 6).
SYSTEMS CHECK SCREEN
From the Play screen you can quickly access the Systems Check screen by pressing the
Joystick LEFT. The Systems Check screen gives you a quick overview of your gun’s primary
operating settings and service status. The screen will automatically return to the Play Screen
after 10 sec.
METHOD OS AIR (MOSair)
PROFILE SELECTION
To enter into Profile Selection screen press and hold the joystick UP
for 2 seconds. This will take you to the profile selection screen. Scroll
up and down to hi-lite the profile you wish to select. Press the CENTER
of the joystick to select the highlited profile. The selected profile is
indicated in the upper right corner.
There are 5 fully adjustable profiles and 1 locked Factory default profile.
Once you have selected your desired profile press and hold UP on the
joystick to return to Play Mode screen, or press and hold the CENTER of
the joystick to enter into the Settings Adjustment menu.
SETTINGS ADJUSTMENT
Enter settings adjustment menu from the profile selection screen, after
selecting the profile you wish to adjust press and hold the CENTER
of the joystick. Scroll left and right to display either Performance or
Data settings. Press the center of the joystick to select the displayed
category.
Settings are separated into two categories: Performance and Data.
PERFORMANCE SETTINGS will affect the M2’s shooting
performance. These settings are not adjustable when the tournament
lock is on.
DATA SETTINGS are for reviewing collected data, display controls,
and system parameters.
Scroll left or right to display menu options.
Press the center of the joystick to select the displayed menu option.
Once selected the setting’s values can be adjusted using the joystick.
Once the desired value or setting has been entered Press the center
of the joystick to save the value, and continue scrolling through menu
options.
NOTE: To exit scroll till the “exit” screen appears and then
press the center of the Joystick. At any point you can
also press and hold the Joystick UP to exit to the Profile
selection screen.