Quick Start Guide LabelWriter ® 450 & 450 Turbo
Copyright © 2015 Sanford, L.P. All rights reserved. Revised 6/15. No part of this document or the software may be reproduced or transmitted in any form or by any means, or translated into another language without the prior written consent of Sanford, L.P. Trademarks DYMO, LabelWriter, and DYMO Label are registered marks in the United States and other countries. All other trademarks are the property of their respective holders.
Quick Start Guide For complete information on using your LabelWriter printer, download the LabelWriter User Guide from one of the following locations: support.dymo.com From the Help menu within DYMO Label™ software By using the QR code to download to your mobile device Downloading DYMO Label Software Download the latest version of DYMO Label software from support.dymo.com. From the Help menu, you can view the following: DYMO Label v.8 Help DYMO Label v.
Connecting your LabelWriter Printer Power adapter Do not connect the printer to your computer until after the software installation is complete. To connect the power 1 Plug the power cord into the power adapter. Power cord 2 Plug the power adapter into the power connector on the bottom of the printer. 3 Plug the other end of the power cord into a power outlet. Power USB USB 24VDC 4 Plug the USB cable into the USB port on the bottom of the printer.
Loading Labels Spool spindle Spool guide To load a label roll 1 Place the label roll on the spindle so that the labels feed from underneath and the left edge of the label roll is firmly against the side of the spool. 2 Press the spool guide tightly against the side of the label roll, leaving no gap between the roll and the spool. 3 Insert the label spool into the slot in the cover with the labels extending from underneath the roll.
Printing Postage with DYMO Stamps For LabelWriter 450 Turbo only To install DYMO Stamps and print postage, sign up for your no-monthly-fee DYMO Stamps account with Endicia. Go to: www.endicia.com/dymostamps At the end of the sign up process, download and install the DYMO Stamps software. Refer to the DYMO Stamps online Help for more information about using the software. NOTE You must have DYMO Label software and your LabelWriter 450 Turbo printer installed before installing the DYMO Stamps software.
2-Year Warranty for Your DYMO Product Your electronic DYMO product is sold with a 2-year warranty from the date of purchase against defects in material and workmanship.
©2015 SANFORD, L.P. WWW.DYMO.COM DISTRIBUTED BY: DYMO, ATLANTA, GA 30328 CUSTOMER CARE: 877-724-8324 DIS-83 12/10 www.dymo.