Owners manual

17
XTL
®
300
User Guide
Text size and style apply to all the text on a single line. You can apply different text
sizes and styles to each line of text on the label.
Laminated cable wrap labels can only be printed using pre-sized Laminated Wire/
Cable Wrap label cartridges.
Use serialization to automatically create a series of labels. See Creating a Series
of Labels on page 29.
Laminated cable wrap label properties are based on the label cartridge selected
and cannot be changed.
To create a laminated cable wrap label
1 From the Home screen, select Laminated Cable Wrap.
Text size and style apply to the currently selected text. If no text is selected,
the size and style apply to all the text in the text box.
2 Add text and formatting.
Cable Wrap Label
The cable wrap label is one of several cable management specific labels. The
content of the cable wrap label is repeated three times so that it can be viewed
from any angle when the label is wrapped around the cable.
One text object is automatically added to the label. Barcodes and images cannot
be added to a cable wrap label.
Text size and style apply to all text on the label.
Use serialization to automatically create a series of labels. See Creating a Series
of Labels on page 29.
Cable wrap labels can be printed on any type of continuous labels.
The label properties you can set are:
To create a cable wrap label
1 From the Home screen, select Cable Wrap.
2 Do one of the following:
• Select the cable type.
• Select Custom and then select the cable diameter.
3 Follow the steps to configure your label.
4 Add text and formatting.
Heat-Shrink Tube Label
The heat-shrink tube label is one of several cable management specific labels.
Heat shrink tube labels can be printed on any continuous or pre-sized Heat-Shrink
Tube labels.
Cable type and
diameter
Cable type: CAT 5/6, COAX, AWG: 4/0 - 2/0, AWG: 0 - 2, AWG: 3 - 5,
AWG: 6+, or Custom
Diameter - Available when Custom is selected for Cable type.
Minimum: 5/32” (4 mm)
Maximum: 2” (50.8 mm)