Owners manual

18
XTL
®
300
User Guide
One text object is automatically added to the label. You can add an image and a
barcode object to heat-shrink tube labels.
Text size and style apply to all the text on a single line. You can apply different text
sizes and styles to each line of text on the label.
Use serialization to automatically create a series of labels. See Creating a Series
of Labels on page 29.
The following table should help you in choosing the correct label width for your
application.
The label properties you can set are:
To create a heat shrink tube label
1 From the Home screen, select Heat-Shrink Tube.
2 Follow the steps to configure your label.
3 Add text and formatting.
110-Block Label
The 110-block label is one of several datacom specific labels. You enter data into
one of three pre-defined block formats depending on the block type you select.
One text object is automatically added for each block. Barcodes and images
cannot be added to 110-block labels.
Text size and style apply to all blocks on the label and all labels in the file. When
Auto fit text is selected for font size, the text is automatically resized to fit that
block. So you may see differences in text size for each block.
Use serialization to automatically populate the blocks. When all the blocks are filled
on the current label, a new label is created. See Creating a Series of Labels on
page 29.
110-block labels can be printed on any type of continuous labels.
Heat-shrink
tube size
Minimum cable
diameter
Maximum cable
diameter
Minimum
AWG
Maximum
AWG
1/4” (6 mm) 0.05” (1.24 mm) 0.14” (3.5 mm) 16 7
1/2” (12 mm) 0.12” (3 mm) 0.28” (7.2 mm) 8 1
1” (24 mm) 0.22” (5.5 mm) 0.57” (14.50 mm) 3 4/0+
Label
orientation
Landscape (Default)
Portrait
Changing the label orientation removes any content on the label,
creating a new blank label.
Label length Minimum: 1 1/4” (31.75 mm)
Default: 2” (50.8 mm)
Label outline Yes - Show label outline.
No - Hide label outline. (Default)
Leader/trailer
match
Yes - Blank space is equal at the beginning and end of the label. (Default)
No - No blank space added at the end of the label.
This property is only available for continuous label cartridges.