Contents About Your New Label Maker ......................................................5 Product Registration............................................................................ 5 Getting Started ..........................................................................5 Connecting the Power ............................................................................. 5 Inserting the Battery Pack ................................................................... 6 Recharging the Battery Pack ...
en Aligning the Text ................................................................................... 16 Creating Fixed-Length Labels ................................................................ 17 Creating Two-Line Labels ...................................................................... 18 Using Clip Art, Symbols, and Special Characters ..........................19 Adding Clip Art ...................................................................................... 19 Adding Symbols ..........
16 17 18 19 20 21 22 23 24 1 15 14 13 2 3 4 5 6 12 11 10 9 8 7 Figure 1 DYMO® LabelManager 360D Electronic Label Maker 1 2 3 4 5 6 7 8 4 Cutter button Print OK Backspace Symbols - Punctuation Symbols - General Return Symbols - Currency 9 10 11 12 13 14 15 16 Accented character Space bar Insert Caps Numeric keys Settings On/Off Clear 17 18 19 20 21 22 23 24 Format Open AC Power adapter Navigation LCD display Cancel Save Preview
en About Your New Label Maker With the DYMO® LabelManager 360D electronic label maker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different fonts, font sizes, and styles. The label maker uses DYMO D1 label cassettes in widths of 6 mm (1/4”), 9 mm (3/8”), 12 mm (1/2”), or 19 mm (3/4"). These label cassettes are available in a wide range of colors. Visit www.dymo.com for information on obtaining labels and accessories for your label maker.
Inserting the Battery Pack The battery pack included with your label maker comes partially charged. You do not need to charge the battery pack before using your label maker for the first time. To insert the battery pack 1 Slide the battery compartment cover away from the label maker. See Figure 2. 2 Insert the battery pack into the battery compartment. 3 Replace the battery compartment cover. Figure 2 NOTE Remove the battery pack if the label maker will not be used for a long period of time.
en Inserting the Label Cassette Your label maker comes with one label cassette. Visit www.dymo.com for information about purchasing additional label cassettes. To insert the label cassette 1 Lift the label cassette cover to open the label compartment. See Figure 3. Figure 3 Label guides 2 Before using the label maker for the first time, remove the protective cardboard insert from the label exit slot. See Figure 4.
Using the Label Maker for the First Time The first time you turn on the power, you are asked to select the language and label width. These selections remain set until you change them. Settings You can change these selections using the key. To set up the label maker 1 Press to turn on the power. 2 Select the language and press OK . 3 Select inches or mm and press OK . 4 Select the width of the label cassette currently in the label maker and press OK .
en Getting to Know the Label Maker Become familiar with the location of the feature and function keys on your label maker. Refer to Figure 1. The following sections describe each feature in detail. Power The button turns the power on and off. After two minutes of inactivity, the power is switched off automatically. When the printer switches off automatically, the last label created is remembered and displayed when the power is turned back on. The previously selected style settings are also restored.
LCD Display The display can show two lines of text at a time. The number of characters displayed on each line will vary due to proportional spacing. With DYMO’s exclusive graphical display, most of the formatting you add is visible instantly. 1 2 3 10 4 9 5 8 6 7 Feature indicators along the top of the LCD display appear black to let you know when a feature is selected.
en Format Format The key displays the Font, Font Size, Style, Borders and Underline, Label Length, Alignment, and Mirror submenus. These formatting features are described later in this User Guide. Insert Insert The key allows you to insert symbols, clip art, or saved text on your label. These features are described later in this User Guide. Settings The key displays the language, units of measure, label width, and information submenus. Settings CAPS Mode The key toggles capitalization on or off.
Navigation Keys You can review and edit your label using the left and right navigation keys. You can also navigate through menu selections using the up and down navigation keys, and then press OK to make a selection. Cancel The key allows you to exit from a menu without making a selection or to cancel an action.
en Formatting Your Label You can choose from several format options to enhance the appearance of your labels. 2 3 1 4 7 5 6 1 2 3 4 Font type Font size Font style Borders/Underline 5 6 7 Mirror Alignment Label length To adjust the formatting Format 1 Press . 2 Use the navigation keys to select the formatting option to change and press OK . 3 Select the option to apply to your label and press OK .
Font Type Three font types are available for your labels: ♦ { Basic Serif Fun Use the up and down navigation keys to select the font type. Font Size Seven font sizes are available for your labels: The font sizes available depend on the label width you have selected. The font size applies to all characters on a label.
en Font Styles { You can choose from six different font styles: ♦ Normal Bold Italic Outline Shadow Vertical Use the up and down navigation keys to select the font style. Adding Borders and Underline Styles You can highlight your text by choosing a border or underline style.
♦ Use the up and down navigation keys to select the border or underline style. A label can be underlined or enclosed in a border, but not both together. When using borders on two-line labels, both lines are enclosed in one border. When using underline on two-line labels, both lines are underlined. Using Mirror Text The mirror format allows you to print text which reads from right to left, as you would see the text in a mirror. ♦ Use the left and right navigation keys to select the mirror format.
en Creating Fixed-Length Labels Normally, the length of the label is determined by the length of the text. However, you can choose to set the length of the label for a specific application. When you choose a fixed label length, the size of the label text is automatically adjusted to fit the label. If the text cannot be adjusted to fit within the fixed label length, a message is displayed showing the smallest possible label length for this text. You can choose a fixed length label up to 400 mm (15”) long.
Creating Two-Line Labels You can print a maximum of two lines on a label. Only one line of text can be printed on 6 mm (1/4") labels. To create a two-line label 1 Type the text for the first line and press 2 Type the text for the second line. 3 Press 18 to print. .
en Using Clip Art, Symbols, and Special Characters Clip art, symbols, punctuation, and other special characters can be added to your labels. Adding Clip Art The label maker includes the clip art shown below. ↔ © ® ™ ☺ ♠ ♣ ♥ ♦ To insert clip art Insert , select Clip Art, and then press OK 1 Press 2 Use the up and down or left and right navigation keys to select the desired clip art. 3 When you locate the clip art, press your label. OK .
Adding Symbols The label maker supports the extended symbol set shown below. ? ! _ - : ₅ ₆ ₇ ₈ ₉ ' " , .
en To quickly add symbols 1 Press one of the following: • • • 2 to add a general symbol. to add a punctuation mark. to add a currency symbol. Select the symbol you want and press OK . Adding International Characters The label maker supports the extended Latin character set. After pressing the Accent key, pressing a letter brings up a menu containing all the available variations of that letter.
Printing Options You can preview your label and print multiple labels. Previewing Your Label You can preview the text and formatting of your label prior to printing. To preview your label ♦ Press . The label length is displayed. Then, if necessary, the text of the label scrolls across the display. Printing Multiple Labels Each time you print, you are asked how many copies to print. You can print up to ten copies at one time. To print multiple labels 1 Press .
en Using the Label Maker Memory The label maker has a powerful memory feature that allows you to save the text of up to nine frequently-used labels. You can recall saved labels and you can insert saved text into a label. Saving a Label You can save up to nine frequently-used labels. When you save a label, the text and all formatting are saved. To save the current label 1 Press 2 Use the navigation keys to move through the locations. . The first available memory location is displayed.
Inserting Saved Text You can insert the text of a saved label into the current label. Only the saved text is inserted, not the formatting. To insert saved text 1 Position the cursor at the location in the label where you want to insert the text. 2 Press Insert , select Saved Text, and press OK . The first memory location is displayed. 3 Use the navigation keys to select the text you want to insert. 4 Press OK . The text is inserted in the current label.
en Caring for Your Label Maker Your label maker is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your label maker from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette. To clean the cutter blade 1 Remove the label cassette. 2 Press and hold the cutter button to expose the cutter blade. See Figure 6. 3 Use a cotton ball and alcohol to clean both sides of the blade.
Troubleshooting Review the following possible solutions if you encounter a problem while using your label maker. Problem/Error Message Solution No display • Ensure the label maker is turned on. • Attach the power adapter to recharge the battery pack. See Recharging the Battery Pack. Poor Print Quality • Attach the power adapter to recharge the battery pack. See Recharging the Battery Pack. • Clean the print head. • Ensure the label cassette is installed properly. • Replace the label cassette.
en Problem/Error Message Solution Battery Failure! • Ensure the battery pack is inserted correctly. Battery pack not inserted properly See Inserting the Battery Pack. or damaged. • Replace the battery pack. Wait - Battery Charging Allow the battery pack to recharge before unplugging the label maker. Tape Jam Motor is stalled due to label jam. • Remove jammed label; replace label cassette. • Clean cutter blade. If you still need assistance, visit the DYMO Web site at www.dymo.com.
Environmental Information The equipment that you have bought requires the extraction and use of natural resources for its production. It may contain substances that are hazardous to health and the environment. In order to avoid the dissemination of those substances in our environment, and to diminish the pressure on natural resources, we encourage you to use the appropriate take-back systems.