• Up to eight text characters, plus the cursor, at one time. Use or to move along the text. • Eight indicators – as shown above. • The display will flash if you press an incorrect key in a function sequence. Introduction GB The Dymo LM100 Electronic Labelmaker enables you to create a wide variety of high quality self-adhesive labels of up to 100 characters. The Labelmaker uses 9mm (3/8") or 12mm (1/2") wide tape cassettes in a number of label colours.
position the cursor under the character to the right of the insertion point, then type in the characters required. PRINTING • Press PRINT BOXED/UNDERLINED PRINTING BOX/UL • Press BOX/UL once to display the menu below. PRINT to print the label. A A • Use cutter lever E to release the label – see page 2. PREVIEW Allows you to preview your label before printing it. Normal text PREVIEW + • Press and the entire text will scroll across • Use the display.
Note: A row of vertical dots will print between each label as a cutting guide. Cleaning • Clean the cutter blade regularly: Remove the cassette, then insert the tip of a ball pen or pencil between Lshaped piece D➊ and the guide pin – see page 2. • Press and hold down cutter lever E to expose cutter blade D➋, then use a cotton bud and alcohol to clean both sides of the blade. Release cutter lever E. • Check and clean print head face D➌ regularly using a cotton bud and alcohol ONLY.
