User Guide LabelManager ® 160
Copyright © 2011 Sanford, L.P. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means or translated into another language without the prior written consent of Sanford, L.P. Trademarks DYMO and LabelManager are registered marks in the US and other countries. All other trademarks are the property of their respective holders.
Contents About Your New Label Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Registering Your Label Maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connecting the Power . . . . . . . . . .
1 2 3 20 4 19 5 6 7 18 17 8 16 9 10 15 11 14 12 13 Figure 1 DYMO LabelManager 160 Label Maker 1 LCD display 8 Cancel 15 Accented characters 2 Italic 9 OK 16 Navigation 3 Label exit slot 10 Symbols – Punctuation 17 Menu 4 Underline/Boxes 11 Backspace 18 On/Off 5 Vertical 12 Return 19 Font size 6 Cutter button 13 Space bar 20 Bold 7 Print 14 Caps 4
About Your New Label Maker Connecting the Optional Power Adapter With the DYMO LabelManager 160 label maker, you can create a wide variety of high-quality, self-adhesive labels. You can choose to print your labels in many different font sizes and styles. The label maker uses DYMO D1 label cassettes in widths of 6 mm (1/4”), 9 mm (3/8”), or 12 mm (1/2”). Labels are available in a wide range of colors. An optional 9 Volt, 2 A power adapter can be used to power the label maker.
Getting to Know the Label Maker 3 Insert the cassette and press firmly until the cassette clicks into place. See Figure 5. Become familiar with the location of the function keys on your label maker. Refer to Figure 1 on page 4. The following sections describe each feature in detail. Power The key turns the label maker on and off. After two minutes of inactivity, the label maker is switched off automatically.
Menu Adding International Characters The key displays the Symbols/Clip Art and Settings tabs. The label maker supports the extended Latin character set. Pressing the key toggles between the Symbols/ Clip Art and Settings tabs. Pressing followed by a letter displays all of the available variations of that letter. Symbols/ Clip Art tab For example, if you press and then the letter a, you will see à á â ã ä and so on through all the variations available.
Adding Box and Underline Styles Caring for Your Label Maker You can highlight the text by adding a box or underline style. Your label maker is designed to give you long and trouble-free service, while requiring very little maintenance. Clean your label maker regularly to keep it working properly. Clean the cutter blade each time you replace the label cassette.
Clip Art Symbols ! © ® ™ ☺ 9 ' " , .
Troubleshooting Review the following possible solutions if you encounter a problem while using your label maker. Problem/Error Message Solution No display Ensure the label maker is turned on. Replace batteries or connect the optional power adapter. Poor print quality Replace batteries or connect the optional power adapter. Ensure label cassette is installed properly. Clean the print head. See Caring for Your Label Maker. Replace the label cassette.
Documentation Feedback We are constantly working to produce the highest quality documentation for our products. We welcome your feedback. Send us your comments or suggestions about our user guides.
