Introduction Creating your first label The Dymo LabelPoint 200 enables you to create a wide variety of high quality self-adhesive labels of up to 90 characters. You will no doubt be anxious to see what your new LabelPoint 200 can do. Before we go on to explore the many advanced features of the LP200, follow these simple steps to create your first label: The LabelPoint uses 6mm (1/4"), 9mm ( 3/8") or 12mm (1/2") wide tape cassettes in a number of label colours.
The Display Italic CURSOR KEY • Press or to move the cursor along the text, one character at a time. • Press and hold to scan through the text. • Press + or to move the cursor to the beginning or end of the line of text. • When used in conjunction with certain function keys, use or to select options. • To insert characters into the text, use or to position the cursor under the character to the right of the insertion point, then type in the characters required.
The "B" (BIG FONT) mode will produce highly visible labels using the entire print height on all except 6mm labels. In “B” mode, all text will be printed as capitals (without accents). or to move the • To create a label in "B" mode use • Use cursor under "B" and press (BFONT lights in display). • In "B" mode, you can select between condensed, normal or extended, but all other options are not available. JUSTIFY JUST Labels are normally printed with the text left-justified.
1, 2, 3 . ..n ‘Sale 10.00/’ becomes ‘Sale 10.00/BF403.40’ If the original number is at the end of the label, it will be replaced by the BF value: ‘Sale 10.00’ becomes ‘Sale BF403.40’ Press then to continue the sequence. • It is also possible to include automatic incremental numbering when printing multiple copies. • Key in your starting number, eg. LABEL 1A . PRINT COPIES • Pressing C will convert the number on the label into Euros and add the Euro value to the end of the label: ‘Sale 10.
Tape jammed • lift out tape cassette carefully • remove/release jammed tape • DO NOT cut the ink ribbon – turn spool C➌ to tighten • cut off excess label tape • refit/replace the tape cassette. Poor cutter performance • clean the cutter blade regularly No response to print key • !!!!!!!!!!!!!!! in the display indicates a printer jam. Press any key to return to normal display. Open the cassette compartment and free the jam. • flashing in the display indicates discharged batteries.
8
